항목: | 작동 센서 모듈과 U-라인 | 재료: | 알루미늄 합금 + PMMA 렌즈 / PC 커버 |
---|---|---|---|
길이: | 900mm | UGR: | <19> |
힘: | 35W,50W,65W,70W,120W,150W... | 센서: | 일광 센서 ; 작동 센서 ; D+M 센서 |
빔 각: | 60' ;120' ; 비대칭이어서 두 배가 되세요 | 조광: | 달리, 1-10V, 차스위치 |
광색채: | 온백색, 하얀, 냉백색 | 광효율: | 135-150LM/W |
하이 라이트: | 150lm/W Led Linear Trunking System,900mm high bay industrial lighting,150lm/W high bay industrial lighting |
1. High efficiency up to 150 lm/w, energy savings up to 90% long life, 50,000 hours lifespan
2. 60 degree 120 degrees diffuse with track spotlight which can be adjustable in any angle
3. Quick start without delay and flickery
4. Low THD under 15%, High Power factor >0.95
5. RoHS-conformity, no mercury
6. Directly fits into USA standard and Europe standard
7. Length available in 600mm, 1200mm, 1500mm, 2400mm, 3000mm
8. Widely Application: Supermarkets, Shopping malls, Exhibition halls, supermarkets, Office, Parking Lot …
U-Line with Multi-sensor
The Multi-sensor system combines energy-saving with high convenience for users. Most energy can be saved by integrating motion and daylight sensors into the trunking. It can swivel and help to detect the area accurately. It ensures a sufficient level of brightness in specific areas under a defined period of time.
Group control sensor or broadcast control sensor
Coreshine Daylight Sensor:
Daylight mode operation only.
By detecting the light level, our led linear system can be self-adjustable the brightness via the Daylight sensor, then it reaches the purpose of saving energy and cost.
Coreshine Motion Sensor:
Motion mode operation only.
On this mode, it can detect the long-distance motion of humans via motion sensors.
H:8m | H:15m | |
|
Lamp installation height>=3m L1:2.5mm L2:2m Lamp installation height<=3m if it's 3m L1=tan40°*H*2 L1=5M L1=tan20°*H*2 L1=2.1M |
Lamp installation height>=6m L1:1mm L2:1m Lamp installation height<=6m if it's 6m L1=tan40°*H*2 L1=10M L1=tan20°*H*2 L1=4.3M |
Coreshine Motion + Daylight:
This mode combines the motion sensor and daylight sensor for light dimming control. It can automatically adjust the lighting to reach the defined brightness, then remains at a lower brightness level during the stand-by time, if there is no any object be detected again after the stand-by time, the lamp will automatically be switched off. This mode can be widely applied in such as office, factory, or warehouse. It can save energy largely without any manual control.
Setting:
Length | detection | Code No. |
600mm | 8m detection | CUM-0608-X1WH-X2 |
15m detection | CUM-0615-X1WH-X2 | |
1200mm | 8m detection | CUM-1208-X1WH-X2 |
15m detection | CUM-1215-X1WH-X2 |